Benchmarking: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 24: | Line 24: | ||
* Setup time: approximately 40 seconds | * Setup time: approximately 40 seconds | ||
* Hardware delay (from finished setup to first plot appearing, this is mostly the time required for hardware to initialise): 70 seconds | * Hardware delay (from finished setup to first plot appearing, this is mostly the time required for hardware to initialise): 70 seconds | ||
* Screen update rate: approximately one screen update every 9 seconds | * Screen update rate: approximately one screen update (all 16 plots) every 9 seconds | ||
Revision as of 23:28, 30 June 2024
This page contains results of benchmarking tests that allow you to compare the speed and functionality of the software with other products. It also gives more information on the computer specification requirements and how much difference they make to run speed.
PC 1:
- This PC meets or exceeds all of the recommended specifications.
- HP Victus 16.1 (16-r0153TX) (obtained June 2024 for AU$1900)
- 32GB RAM
- 1 TB SSD
- 13th Gen Intel(R) Core(TM) i7-13700HX 2.10 GHz (AVX2 support)
- NVIDIA GeForce RTX 4060 8GB GDDR6 (Open GL 4.6, compute capability 8.9)
- 64 bit windows 11 Home (23H2)
Test 1:
- National Instruments NI cDAQ-9178 carrier with 4 X NI-9234 modules
- 16 IEPE channels
- Maximum sample rate (51.2 kHz)
- 16 separate FFT plots with current and peak hold spectra
- 1 Hz frequency resolution, FFT X axis from 0 to 200 Hz
- Full screen display with 2 columns
- This requires 12 mouse clicks and 3 keystrokes to set up
Test 1 on PC 1:
- Software startup time: < 30 seconds
- Setup time: approximately 40 seconds
- Hardware delay (from finished setup to first plot appearing, this is mostly the time required for hardware to initialise): 70 seconds
- Screen update rate: approximately one screen update (all 16 plots) every 9 seconds